EPever PT Adapter PAL-ADP-50AN

PAL-ADP-50AN is a parallel adapter for controlling and synchronizing the charging of multiple AN-series MPPT solar controllers connected to a single battery in parallel, which also monitors the charging and operating status in real time.

The adapter automatically changes the charging and operating status of the controllers according to the battery status to extend the life of the system.

Feature：

- Unification of parameters of multiple controllers

- Charge balancing function enables intelligent control of charging of each controller

- Monitor the working status and intelligently control the connected controllers

- Up to 6 parallel connected AN series solar MPPT controllers are supported

- Standard Modbus communication protocol and associated PC monitoring software

- One-button baud rate setting of 9600 or 115200 baud

- LED operating status indicator.

CC-USB-RS485-150U data cable is required to set up individual controllers for parallel operation, monitoring and parameter setting via PC (not included).

Technical specification:

Use for models: MPPT series AN (50-100 A)

Input voltage: 5 V DC (supply directly from the controller)

Operating power consumption: 0.25 W

Serial port baud rate: 9600 115200 (default)

Overall dimensions 151.5×69.9×25.7 mm

Mounting size. Φ6.5

Working temperature: -35～55℃

Protection: IP30

Weight: 30 g

For more information, please refer to the attached technical data sheet and manual.